U-POL - High#5 High Build Primer (450mL Aerosol) : 0783 / 0791

High#5 High Build Primer (450mL Aerosol)

HIGH #5 is a ready to use high build primer/filler in an aerosol. It is used for priming uneven surfaces before top coating.

High #5 is capable of producing a coating of a film thickness similar to that of a spray gun applied primer. The convenience of using a high build primer in an aerosol means that masking is kept to a minimum.  Mixing paint and cleaning spray equipment are avoided as a result of using HIGH #5 leading to savings in time and materials.

HIGH #5 is cromate free and easy to sand.

HIGH #5 can be applied to the following surfaces:

• Thoroughly clean and degrease surfaces with a suitable panel wipe or thinner.
• Abrade wet or dry with 280-320 grit abrasive, re-clean, dry and degrease.
• Shake can thoroughly before use for a minimum of 2 minutes.
• Apply 1-2 light even coats.
• Allow 5-10 minutes flash off time between coats.
• Allow 10-20 minutes drying time before overcoating.

HIGH #5 should be flatted wet with 600-800 grit or dry with 400-600 grit abrasive.

HIGH #5 may be over-painted with most paint systems.

High#5 High Build Primer (450mL Aerosol)

High#5 High Build Primer (450mL Aerosol)


Product Reviews :
Write a review