U-POL - Weld #2 Weld Through Build Primer (Copper) : 0768

Weld #2 Weld Through Build Primer (Copper)

WELD #2 - COPPER is a high adhesion, super-conductive Copper rich Weld Through Primer specially formulated to offer excellent rust protection for both SPOT, MIG and TIG welding.

WELD #2 - COPPER contains high purity Copper giving excellent conductivity as well as high adhesion to metals.

WELD #2 - COPPER gives a durable, semi-flexible metallic finish, which leaves a corrosion resistant surface.

• Before applying WELD #2 - COPPER , Thoroughly clean and degrease surfaces with a suitable spirit wipe or thinner. Abrade the surfaces wet or dry with 280-320 abrasive, reclean, dry and degrease.
• Shake can thoroughly before use for a minimum of 2 minutes.
• Apply 1-2 light, even coats.
• Allow 5-10 minutes flash-off time between coats.
• Allow 10-20 minutes drying time before welding.

Welding using SPOT, MIG or TIG techniques should then be undertaken. For optimum anticorrosive protection, a second coat of WELD #2 - COPPER should be applied after welding is completed following the procedure described above.

Over-painting WELD #2 - COPPER should be flatted wet with 600-800 or dry with 400-600 abrasive.

WELD #2 - COPPER may be over-painted with most paint systems.

Weld #2 Weld Through Build Primer (Copper)

Weld #2 Weld Through Build Primer (Copper)


Product Reviews :
Write a review