SEM - 1K High Solids Clearcoat (20oz s/c) : 40903

1K High Solids Clearcoat (20oz s/c)

40903 1K HS CLEAR is an aerosol packaged product designed as a quick alternative to mixing typical automotive clearcoats. It is perfect for small accessories, door jambs, and when cutting in new parts. The combination of spray tip and formulation delivers professional results. 40903 lays down flat and dries quickly saving valuable time.

• Convenient aerosol – no mixing
• UV resistant – good color holdout
• Quick drying – increased production
• High gloss – excellent appearance
• Good film build – added durability
• Lays flat – professional results

MIXING: Shake well before using.

APPLICATION: Allow basecoat to flash according to manufacturer’s instructions.

Allow 40903 to dry for at least 1 hour before handling.

IMPORTANT: If too much 40903 is applied or it is applied before the basecoat has flashed off properly, re-wetting of the basecoat could occur.

NOTE: If clogging develops, remove spray button with a twisting motion and clean with material compliant with VOC regulations in your area. Do not stick pin or other object into can. Gently replace spray button with top of can and spray button pointed away from you.

NOTE: After each use, turn can upside down and spray several seconds to clear spray tip.

1K High Solids Clearcoat (20oz s/c)

1K High Solids Clearcoat (20oz s/c)


Product Reviews :
Write a review