Leather & Vinyl Repair Compound
Leather & Vinyl Repair Compound is a unique compound that successfully repairs cuts and abrasions on leather and vinyl. 38422 has excellent strength, flexibility and can be used to fill minor imperfections. 38422 works effectively on leather and vinyl substrates to create a durable and long lasting repair. This product is packaged in an easy-to-use tube, which helps prevent waste. 38422 is an excellent compliment to SEM SURE-COAT™, COLOR COAT and CLASSIC COAT™, providing a quick, reliable repair and refinish with just one system. Features Excellent strength 3 oz. tube means more product and less waste Paintable Superior adhesion and flexibility Easy to use Economical Isocyanate free Handling and Application PREPARATION : Leather Repair - With a gray scuff pad, clean the area with 39362 SEM SOAP. Wipe with a clean, damp towel and dry. Next, clean the area thoroughly with 3835( ) PLASTIC/LEATHER PREP. If needed, trim away the cracked edge with a razor blade. Sand around the repair area with 400 or 600 grit sand paper, blow off and clean again with 3835( ) PLASTIC/LEATHER PREP. Vinyl Repair - With a gray scuff pad, clean the area with 39362 SEM SOAP. Rinse with water and dry. Next, apply 3834( ) VINYL PREP using a gray scuff pad. Rinse with water and dry. If needed, trim away the cracked edge with a razor blade. Sand around the repair area with 400 or 600 grit paper, blow off and clean again with 3834( ) VINYL PREP. APPLICATION : Apply a thin layer of 38422 to the backing fabric, heat around the edges and press lightly with a cold block. Next, apply 38422 over the repair area. NOTE: Applying several thin layers of 38422 will produce a better repair than one thick application. Using a low heat gun, hold the gun 6 to 8 inches away for 1 minute or until the compound turns clear. Place one of the 70022 INTERIOR GRAINING PADS over the repair area and apply pressure to the area with a cold block. Sand down the high area or refill the repair area if needed. Once complete, the repair may be topcoated. Use COLOR COAT or SURE-COAT for vinyl repairs or SURE-COAT for leather repairs. NOTE: Avoid overheating the substrate as damage may occur. A cone shaped nozzle for the heat gun will help focus the heat on the repair area. STORAGE : 38422 LEATHER & VINYL REPAIR COMPOUND should be stored in a cool dry place with adequate ventilation away from heat, sparks and flames. The shelf life for 38422 is 5 years when stored under normal conditions.
|
