4100 Series: Aluminum Bases

Actual aluminum-flake colors often used as base for 4600 Series Candy Colors.

Highly reflective – more so than 4300 Series silvers.

Best applied over 4002 Sealer Dark or an underlying coat of Auto Air, not direct to the substrate.

Aluminum Bases are may require a longer period to cure than what is required for most other Auto Air Colors due to coating used to prevent aluminum from gassing.

Use of mid-coat prior to aggressive masking for graphics may prevent peeling.

Mid-coat may be of a urethane inter-coat clear or Auto Air 4004 Transparent Base.

Use of mid-coat may not be necessary, especially if Aluminum Base Colors are thoroughly cured.

Intended for application with a spray gun or large tip-sized airbrush.

Spray-Gun: 1.2mm tip Mini-Spray Gun: 1.0mm tip Airbrush: 0.5mm tip or larger

Reduce: Spray Gun @ 10% per volume with 4011 Flash Reducer Airbush @ 30% per volume or more with 4011 Flash Reducer

4101 Aluminum Base (Fine) Aluminum Base-Fine (4oz)(4101-04) Aluminum Base-Fine (16oz)(4101-16) Aluminum Base-Fine (32oz)(4101-32) Aluminum Base-Fine (128oz)(4101-12) Quantity:	4102 Aluminum Base (Medium) Aluminum Base-Med. (4oz)(4102-04) Aluminum Base-Med. (16oz)(4102-16) Aluminum Base-Med. (32oz)(4102-32) Aluminum Base-Med. (128oz)(4102-12) Quantity:
4103 Aluminum Base (Coarse) Aluminum Base-Coarse (4oz)(4103-04) Aluminum Base-Coarse (16oz)(4103-16) Aluminum Base-Coarse (32oz)(4103-32) Aluminum Base-Coarse (128oz)(4103-12) Quantity: