1. Product can be applied over bare metal or primer.
2. Clean and dry surface with soap and water, then with 3M™ General Purpose Adhesive Cleaner, PN 08984.
3. Shake can thoroughly for 1 minute.
4. Remove cap and tightly screw on 3M™ Body Schutz Applicator gun (PN 08997).
5. Connect to air line and spray at pressure indicated on the can.
6. Apply in relatively light coats, allowing for the solvent to evaporate somewhat between coats. Build to desired thickness.
7. Dry time is typically 30 minutes at room temperature. Thicker applications may take longer to dry.
8. Clean gun thoroughly after use (as you would a paint gun) to insure it will operate normally the next time it is used.
