Designed to remove grade P3000 3M™ Trizact™ Hookit™ II abrasive disc sand scratches, or to remove compound swirl marks, and leave an excellent high gloss finish. Ideal for small spot and panel repairs. Good handling with easy cleanup.
Directions for Use:
Polish using an air or electric buffer (1000-2500 rpm) equipped with a 3M™ Perfect-It™ Foam Polishing Pad.
1. Shake container well before using.
2. Apply enough polish to the paint surface to work a spot repair, or a two foot by two foot area. For best results, use enough polish to work a spot repair for about 30 seconds, or a two foot by two foot area for about one to two minutes.
3a. Buff spot repairs using medium pressure to effectively remove grade P3000 sand scratches.
3b. Buff large areas using light to medium pressure.
4. Reduce pressure as polish begins to dry and buff to a high gloss. Use a 3M™ Perfect-It™ III Detailing Cloth to remove any remaining residue.
Note: If glaze slings onto an adjacent panel, remove spatter using a 3M™ Perfect-It™ III Detailing Cloth before glazing the next panel.
